I'm building a wireless rover controlled by a PC using Lynx Rover Controller. The issue is that Lynx Rover Controller (version V0.2.2) cannot connect to SSC 32 board, it displays "Not Connected" status and doesn't react on any icon or keyboard pressings.
At the same time I can control all servos individually (on each individual channel) using Lynx SSC 32 Terminal. The settings for Terminal are: baud rate = 115200, data bits = 8, stop bits = 1, parity = none, flow control = none. Version of SSC 32 controller is SSC32-V2.03XE. The PC and SSC 32 are connected by RS232 cable + USB-to-serial-adapter recommended by Lynxmotion (http://www.lynxmotion.com/p-699-usb-to- ... cable.aspx
Where the connection problem could be?