Lynxmotion Tech Support

I am selling 12 used Hitec HSS-5990TG servos for $480 and 7 used Hitec HSS-5980SG servos for $280. Servos come with the Lynxmotion HMSH-02 taped servo horns w/screws. I also have all the original servos and backs except for one. Please pay w/paypal. Serious offers we can discuss other methods of payment.

Thanks.

Hi, I'm very interested!

Do you have a picture of them?
Do you ship to Norway?

_________________
[b]Kåre Halvorsen, Zenta[/b]
-----------------------------------------
Zenta's blog
http://zentasrobots.com/
Zenta's YouTube channel
http://www.youtube.com/ZentaOlbaid
-----------------------------------------

Zenta,

I will try to get pics to you sometime tomorrow. I will have to look into what shipping costs would be to Norway, I may have to charge you for that. But I would try to make it as cheap as possible. Let me know what your preferred shipping method would be. By the way you are a major inspiration robot builders, the creations you come up with are beyond awesome. I will get back to you in a day or two.

Thanks for your interest, I know they will be put to good use.

Ken

Thanks for you nice words!

I don't have any preferred shipping method. I'll pay for the shipment. But I'm not interested in spending to much money on shipment either. I'm in no hurry though. As long as I can track the package I'm good.

I read from one of your other posts:


The servos you need to replace are they replaced or not one of those you are selling? I assume all servos are tested ok?

_________________
[b]Kåre Halvorsen, Zenta[/b]
-----------------------------------------
Zenta's blog
http://zentasrobots.com/
Zenta's YouTube channel
http://www.youtube.com/ZentaOlbaid
-----------------------------------------

Yes the servos that were bad have been replaced. And all have been tested and are working properly. Which servos did you actually want to purchase. The 5990's, the 5980''s are both? I will be going by the Post Office tomorrow (Monday), to check the international shipping rates, I believe that they have pretty good rates and can be tracked. Also I will have pictures tomorrow as well.


Thanks

Sounds good!

I'm interested in all of them.

_________________
[b]Kåre Halvorsen, Zenta[/b]
-----------------------------------------
Zenta's blog
http://zentasrobots.com/
Zenta's YouTube channel
http://www.youtube.com/ZentaOlbaid
-----------------------------------------

Was it so that they also come with their original servo horn and the optional bottom with a pivot point too?

_________________
[b]Kåre Halvorsen, Zenta[/b]
-----------------------------------------
Zenta's blog
http://zentasrobots.com/
Zenta's YouTube channel
http://www.youtube.com/ZentaOlbaid
-----------------------------------------

Here are the pictures of everything I am selling and the shipping charge to Norway will be $26.








Thanks.

Looking good! I'm sending you a PM.

_________________
[b]Kåre Halvorsen, Zenta[/b]
-----------------------------------------
Zenta's blog
http://zentasrobots.com/
Zenta's YouTube channel
http://www.youtube.com/ZentaOlbaid
-----------------------------------------

I sent you a pm. Also I cannot find one of the pivot point backs. I also found a 5980 that has cable that was cut in half. All you need to do is put a plug on the end and it will be a working servo. I am throwing it in for free. So will have a total of eight HSS-5980's instead of 7.

A half cable isn't a problem. 8 sounds even better, thanks!

_________________
[b]Kåre Halvorsen, Zenta[/b]
-----------------------------------------
Zenta's blog
http://zentasrobots.com/
Zenta's YouTube channel
http://www.youtube.com/ZentaOlbaid
-----------------------------------------

Hi,

Yesterday I got 12x5990's and 8x5980's in good working condition. All tested OK.

Thanks for a great deal!

_________________
[b]Kåre Halvorsen, Zenta[/b]
-----------------------------------------
Zenta's blog
http://zentasrobots.com/
Zenta's YouTube channel
http://www.youtube.com/ZentaOlbaid
-----------------------------------------

Good,

Glad to see that they finally arrived and you are happy with your purchase. Hated to part with them, but desperate times, I know with you they'll go to good use.

Thanks

Ken