Lynxmotion Tech Support

im having issues about getting my bot board to communicate with my pc programs can connect to the board and the scc-32 works with pc but not the bot board. im using serial to usb to connect to my laptop win7 ((sp1) 32 bit).

also my bot board is making a churping noice that will stop when i try to connect to bot board thin start and i get erroer's

http://img502.imageshack.us/img502/9804 ... age2hy.png
http://img851.imageshack.us/img851/8315 ... magecs.png
http://img855.imageshack.us/img855/5600/photo014e.jpg

What IDE are you using?

The timing for programming an Atom is more demanding than sending commands to the SSC-32. If there are any issues with the comm system it will show up when programming an Atom. We have a thread that covers all sorts of comm issues.
viewtopic.php?f=2&t=4702

You mention you are using a USB to serial cable, but who makes it? What brand and model number?

_________________
Jim Frye, the Robot Guy
http://www.lynxmotion.com
I've always tried to do my best...

basic micro atom ide 02.2.1.1

and trying basic micro studio 2.0.0.15

the cable is a genaric brad for bustbuy like 20$ there is no model info or code ....

found it here is bustbuy link : http://www.bestbuy.com/site/Dynex%26%23 ... &cp=1&lp=1

.....bump

'Ya gets what 'ya pays for!

I suggest getting the tested cables, like the one LM carries.

Once you have a solid, working base to start from, you can test other brands/models.

Alan KM6VV

_________________
Visit:
http://groups.yahoo.com/group/SherlineCNC/
http://tech.groups.yahoo.com/group/HexapodRobotIK/

i can only get items from local stores bust buy ect.

but the adapter works whit the ssc-32 when setting all the servos to 1500

What Jim said.

Alan KM6VV

_________________
Visit:
http://groups.yahoo.com/group/SherlineCNC/
http://tech.groups.yahoo.com/group/HexapodRobotIK/