Lynxmotion Tech Support

look at those beauty's!
nicely priced too.

_________________
Jonny Poole,
Freelance Concept Art & Animatronics, 3D Art and 3D Modelling, as well as Physical Modelling, Mechanical design, and illustration.
http://www.innerbreed.co.uk
Create, Innovate, Inspire.

Good to hear!

So it looks like the tubing of the leg would be required?

Thanks!

Alan KM6VV

_________________
Visit:
http://groups.yahoo.com/group/SherlineCNC/
http://tech.groups.yahoo.com/group/HexapodRobotIK/

Yep, the kit includes only what is shown in the picture, so you will need the tubing, as well as wire and heat shrink.

_________________
Beth
Lynxmotion, Inc
http://www.lynxmotion.com

THANKS I COULD HELP BRO

Makes sense since the needs of each individual will differ regarding the tubing length or other possible ways of attaching the assembly.

_________________
Mike

The robotics nut.

After Jonny mentioned that he was about to start experimenting with these, I remembered that some of the things I wanted to try out with these...

Are they available? I browsed the store and did not find them. Did find an old FSR type of foot sensor. I looked at the link that was a few posts back: http://www.lynxmotion.com/Product.aspx? ... egoryID=89

And it showed some new Aluminum SES Robot Wheel - 2.75"D x 0.27"W (pair).

Kurt

Yeah. They're right here

_________________
Curiously enough, the only thing that went through the mind
of the bowl of petunias as it fell was "Oh no, not again."

James "Don't call me Jim" Frye
Lynxmotion, Inc
http://www.lynxmotion.com

After we transferred the old database into the new store, there was a time when we were having to add things into both the old and new stores separately. So there are a few links that aren't correct, because of us adding the items into each store in different orders (the product ID is different).

The correct link is http://www.lynxmotion.com/p-728-tubing- ... -pair.aspx

Edit: Ninja'd! ...but my answer was better.

_________________
Beth
Lynxmotion, Inc
http://www.lynxmotion.com

THANKS I COULD HELP BRO

Placed my order!

_________________
Jonny Poole,
Freelance Concept Art & Animatronics, 3D Art and 3D Modelling, as well as Physical Modelling, Mechanical design, and illustration.
http://www.innerbreed.co.uk
Create, Innovate, Inspire.

Sounds Great! I need to sit down and figure out what parts I need. I will probably convert my CHR-3 which currently has legs that look like:
Into legs that can take the contact sensors. Probably
My guess is I will just need to order something like:

3 Tubing Foot Switch Kit (Pair)
3 Aluminum Multi-Purpose Servo Bracket Two Pack
3 Aluminum "L" Connector Bracket Two Pack
3 Aluminum Tubing Connector Hub (pair)

I will try to verify this later.

Kurt

+ tube!

_________________
Jonny Poole,
Freelance Concept Art & Animatronics, 3D Art and 3D Modelling, as well as Physical Modelling, Mechanical design, and illustration.
http://www.innerbreed.co.uk
Create, Innovate, Inspire.

Thanks
Kurt

Thanks again. Jim/Beth - Let me know if I missed anything.

Kurt

Good to go!

_________________
Jim Frye, the Robot Guy
http://www.lynxmotion.com
I've always tried to do my best...

Good News, Bad News.

Good news is it arrived today

Bad News: I screwed up .

I was thinking in pairs and only ordered 3 11/2 tubes... Hard to make 6 legs I will check to see if I have some other longer ones still sitting around that I can try to cut to size...

Kurt

school boy error. Oops. been there my friend. iv not had much luck either so far. ill post more in (Ground Contact Switch "Next steps")

_________________
Jonny Poole,
Freelance Concept Art & Animatronics, 3D Art and 3D Modelling, as well as Physical Modelling, Mechanical design, and illustration.
http://www.innerbreed.co.uk
Create, Innovate, Inspire.